Linux version 2.6.5-1.358 (bhcompile@bugs.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Sat May 8 09:04:50 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fffffc0 (ACPI data) BIOS-e820: 000000002fffffc0 - 0000000030000000 (ACPI NVS) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 767MB LOWMEM available. zapping low mappings. On node 0 totalpages: 196592 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192496 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 OID_00 ) @ 0x000e6010 ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x2ffface0 ACPI: FADT (v001 ACER DFL322 0x00000100 _CSI 0x00010101) @ 0x2ffffaa0 ACPI: BOOT (v001 INSYDE BOOT_000 0x00000001 _CSI 0x00010101) @ 0x2ffffb90 ACPI: DBGP (v001 INSYDE DBGP_000 0x00000001 _CSI 0x00010101) @ 0x2ffffbc0 ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x30303030) @ 0x2ffffb30 ACPI: SSDT (v001 INSYDE GV3Ref 0x00002000 INTL 0x20021002) @ 0x2fffad20 ACPI: DSDT (v001 ACER TM290 0x00000006 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet mapped 4G/4G trampoline to ffff3000. Initializing CPU#0 CPU 0 irqstacks, hard=02345000 soft=02344000 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1499.250 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Memory: 776484k/786368k available (1540k kernel code, 9124k reserved, 599k data, 144k init, 0k highmem) Calibrating delay loop... 2973.69 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. Failure registering capabilities with the kernel selinux_register_security: Registering secondary module capability Capability LSM initialized Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f3bf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1500MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xe97e4, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) ACPI: PCI Interrupt Link [LNKB] (IRQs 10) ACPI: PCI Interrupt Link [LNKC] (IRQs 10) ACPI: PCI Interrupt Link [LNKD] (IRQs 10) ACPI: PCI Interrupt Link [LNKE] (IRQs 10) ACPI: PCI Interrupt Link [LNKF] (IRQs 10) ACPI: PCI Interrupt Link [LNKG] (IRQs 10) ACPI: PCI Interrupt Link [LNKH] (IRQs *10) ACPI: Embedded Controller [EC0] (gpe 28) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Simple Boot Flag at 0x37 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1093265739.4294966041:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855GM Chipset. agpgart: Maximum main memory to use for agp memory: 690M agpgart: AGP aperture is 256M @ 0xb0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK6025GAS, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: MATSHITADVD-RAM UJ-820S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(33) hda: hda1 hda2 hda3 hda4 < hda5 > hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 18 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S3 S4 S5) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 183k freed md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: hda3: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 2174954 ext3_orphan_cleanup: deleting unreferenced inode 2158508 ext3_orphan_cleanup: deleting unreferenced inode 2174935 ext3_orphan_cleanup: deleting unreferenced inode 2158507 ext3_orphan_cleanup: deleting unreferenced inode 4824847 EXT3-fs: hda3: 5 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 144k freed SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks NET: Registered protocol family 10 Disabled Privacy Extensions on device 022db720(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ACPI: AC Adapter [ACAD] (off-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 10, pci mem 32866000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 00001200 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 10, io base 00001600 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 10, io base 00001700 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected EXT3 FS on hda3, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com Unable to find swap-space signature kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Unable to find swap-space signature IA-32 Microcode Update Driver: v1.13 microcode: No suitable data for cpu 0 parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] SCSI subsystem initialized inserting floppy driver for 2.6.5-1.358 floppy0: no floppy controllers found b44.c:v0.94 (May 4, 2004) divert: allocating divert_blk for eth0 eth0: Broadcom 4400 10/100BaseT Ethernet 00:02:3f:18:65:54 divert: freeing divert_blk for eth0 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (6143 buckets, 49144 max) - 296 bytes per conntrack Broadcom 4401 Ethernet Driver bcm4400 ver. 3.0.7 (10/31/03) divert: allocating divert_blk for eth0 eth0: Broadcom BCM4401-B0 100Base-T found at mem d0002000, IRQ 11, node addr 00023f186554 bcm4400: eth0 NIC Link is Up, 10 Mbps half duplex eth0: no IPv6 routers present Linux Kernel Card Services options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:02:04.0 [1025:0061] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x00111c12, devctl 0x46 Yenta: ISA IRQ mask 0x0040, PCI irq 11 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x230-0x237 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling). lp0: console ready PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49603 usecs intel8x0: clocking to 48000 udf: registering filesystem UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0 UDF-fs DEBUG fs/udf/super.c:1552:udf_fill_super: Multi-session=0 UDF-fs DEBUG fs/udf/super.c:540:udf_vrs: Starting at sector 16 (2048 byte sectors) UDF-fs DEBUG fs/udf/super.c:567:udf_vrs: ISO9660 Primary Volume Descriptor found UDF-fs DEBUG fs/udf/super.c:570:udf_vrs: ISO9660 Supplementary Volume Descriptor found UDF-fs DEBUG fs/udf/super.c:576:udf_vrs: ISO9660 Volume Descriptor Set Terminator found UDF-fs: No VRS found ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A